On previous article we have learnt about how to install the rear derailleur on mountain bike, and now it's time to learn about how to install front derailleur. Maybe for some, front derailleur is not too important due to the riding style, but this maybe will helpful in another time. And we need some tools as the preparation before install the front derailleur.
The main tools to install front derailleur (and rear derailleur, actually) is the hexagonal key with 5 mm size, and also the screwdriver to adjust the setting. The hexagonal key will be used to release the derailleur from its mounting bolt. Special cutter for wire maybe will be used too.
To remove the front derailleur, the first thing to do is change the chain position into the smallest ring, then on the end of the cable, you have to pull on it and then remove the front derailleur cable. Then, you need to break up the chain; find the connector pin on it then use chain breaker.
Now it's time to install the new front derailleur; but give some grease on mounting bolt before apply it. Use your hands to make sure that the front derailleur have been placed properly, both the height and the angle. You must feel by yourself on this part, is the front derailleur has been placed properly or not. If the front derailleur have been placed properly, now adjust the tension on it using the screwdriver. Try various tension until you find it best, by trying to shift up and down. Finish.
0 comments:
Post a Comment